Network Settings
The Platform Core service connector client and the Platform Core CLI use HTTPS on TCP port 443. To use the clients successfully, you must be able to make outbound connections on TCP port 443.
Pipelines can only reach out to the internet on ports 80 and 443.
Locations
The following URLs must be accessible via TCP port 443.
All
ica.illumina.com
Australia (AU)
stratus-gds-aps2.s3.ap-southeast-2.amazonaws.com stratus-gds-aps2.s3.amazonaws.com
Canada (CA)
stratus-gds-cac1.s3.ca-central-1.amazonaws.com stratus-gds-cac1.s3.amazonaws.com
Germany (EU)
stratus-gds-euc1.s3.eu-central-1.amazonaws.com stratus-gds-euc1.s3.amazonaws.com
India (IN)
stratus-gds-aps3.s3.ap-south-1.amazonaws.com stratus-gds-aps3.s3.amazonaws.com
Indonesia (ID)
stratus-gds-aps4.s3.ap-southeast-3.amazonaws.com stratus-gds-aps4.s3.amazonaws.com
Israel (IL)
stratus-gds-ilc1.s3.il-central-1.amazonaws.com
Japan (JP)
stratus-gds-apn1.s3.ap-northeast-1.amazonaws.com stratus-gds-apn1.s3.amazonaws.com
Singapore (SG)
stratus-gds-aps1.s3.ap-southeast-1.amazonaws.com stratus-gds-aps1.s3.amazonaws.com
South Korea (KR)
stratus-gds-apn2.s3.ap-northeast-2.amazonaws.com stratus-gds-apn2.s3.amazonaws.com
United Kingdom (GB)
stratus-gds-euw2.s3.eu-west-2.amazonaws.com stratus-gds-euw2.s3.amazonaws.com
United Arab Emirates (AE)
stratus-gds-mec1.s3.me-central-1.amazonaws.com stratus-gds-mec1.s3.amazonaws.com
United States East (US-N. Virginia)
stratus-gds-use1.s3.us-east-1.amazonaws.com stratus-gds-use1.s3.amazonaws.com
United States West (US-Oregon)
stratus-gds-usw2.s3.us-west-2.amazonaws.com stratus-gds-usw2.s3.amazonaws.com
Taiwan (TW)
stratus-gds-ape2.s3.ap-east-2.amazonaws.com stratus-gds-ape2.s3.amazonaws.com
Bench
The Following URLs must be accessible to connect to Platform Core Bench
Asia-Pacific East (Taipei)
ape2-bench.platform.illumina.com
Asia-Pacific Southeast (Singapore)
aps1-bench.platform.illumina.com
Asia-Pacific Southeast (Sydney)
aps2-bench.platform.illumina.com
Asia-Pacific Southeast (Jakarta)
aps4-bench.platform.illumina.com
Asia-Pacific Southeast (Mumbai)
aps3-bench.platform.illumina.com
Asia-Pacific Northeast (Tokyo)
apn1-bench.platform.illumina.com
Asia-Pacific Northeast (Seoul)
apn2-bench.platform.illumina.com
Canada Central
cac1-bench.platform.illumina.com
Europe Central (Frankfurt)
euc1-bench.platform.illumina.com
Europe West (London)
euw2-bench.platform.illumina.com
Israel Central
ilc1-bench.platform.illumina.com
Middle East Central (United Arab Emirates)
mec1-bench.platform.illumina.com
United States East (N. Virginia)
use1-bench.platform.illumina.com
United States West (Oregon)
usw2-bench.platform.illumina.com
S3 Regions
Australia (AU)
ap-southeast-2
Canada (CA)
ca-central-1
Germany (EU)
eu-central-1
India (IN)
ap-south-1
Indonesia (ID)
ap-southeast-3
Israel (IL)
il-central-1
Japan (JP)
ap-northeast-1
Singapore (SG)
ap-southeast-1
South Korea* (KR)
ap-northeast-2
United Arab Emirates (AE)
me-central-1
UK (GB)
eu-west-2
United States (US-N. Virginia)
us-east-1
United States (US-Oregon)
us-west-2
Mapping S3 Locations to IP Addresses
Amazon provides a JSON-based list of IP address ranges assigned to and used by AWS. This is not a static list, but can change several times per week. To map the S3 storage locations to IP addresses, this list must be actively polled and your security rules must be updated accordingly.
You can use jq to extract the addresses of your S3 storage locations as follows
If you do not have jq installed, install it from the official source.
Download the amazon IP address list.
Open your command prompt and navigate to the location of your address list
Run the following command to find the IP address ranges that AWS uses for S3 in the desired region. In this example we use the us-east-1 region.
Last updated
Was this helpful?

